
2
AVR-1803/883
SPECIFICATIONS
Audio section
• Power amplifier
Rated output:
Front:
80W+80W
(8 ohms, 20Hz~20kHz with 0.08% T.H.D.)
110W+110W
(6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)
130W+130W
(6 ohms, EIAJ *) (Asia Model)
Center:
80W
(8 ohms, 20Hz~20kHz with 0.08% T.H.D.)
110W
(6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)
130W
(6 ohms, EIAJ *) (Asia Model)
Surround:
80W+80W
(8 ohms, 20Hz~20kHz with 0.08% T.H.D.)
110W+110W
(6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)
130W+130W
(6 ohms, EIAJ *) (Asia Model)
Surround Back: 80 W
(8 ohms , 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W
(6 ohms , 1 kHz with 0.7% T.H.D.)
130W
(6 ohms, EIAJ *) (Asia Model)
Dynamic power:
100 W x 2 ch
(8 ohms)
145 W x 2 ch
(4 ohms)
170 W x 2 ch
(2 ohms)
Output terminals:
Front, Center, Surround:
6 ~ 16 ohms
Surround Back: A or B
6 ~ 16 ohms
A + B
12 ~ 16 ohms
Input sensitivity / input impedance:
200 mV / 47 kohms
Frequency response:
10 Hz ~ 100 kHz: +1, -3 dB (DIRECT mode)
S/N:
100 dB (IHF-A weighted) (DIRECT mode)
• Phone equalizer (PHONE input
REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
Signal to noise ratio:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 7 V
Distortion factor:
0.03% (1 kHz, 3 V)
Video section
• Standard video jacks
Input / output level and impedance:
1 Vp-p, 75 ohms
Frequency response:
5 Hz ~ 10 MHz
+1, -3 dB
• S -video jacks
Input / output level and impedance:
Y (brightness) signal
1 Vp-p, 75 ohms
C (color) signal
0.286 Vp-p, 75 ohms
Frequency response:
5 Hz ~ 10 MHz
+1, -3 dB
• Color component video jacks
Input / output level and impedance:
Y (brightness) signal
1 Vp-p, 75 ohms
P
B
/C
B
(blue) signal
0.7 Vp-p, 75 ohms
P
R
/C
R
(red) signal
0.7Vp-p, 75 ohms
Frequency response:
5 Hz ~ 27 MHz
+1, -3 dB
* EIAJ: It is the standard which JEITA (Japan Electronics & Information Technology Industries Association) enacted.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
Содержание AVR-1803/883
