38
ENGLISH
Convenient functions
Quick select function
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n
Saving the settings
1
Set the items below to the settings you want to save.
q
Input source (
v
page 20)
w
Volume (
v
page 20)
e
Surround mode (
v
page 26)
r
Video Select (
v
page 47)
t
Audyssey Setting
(MultEQ®, Dynamic EQ®, Dynamic
Volume™) (
v
page 52)
2
Press and hold the desired
QUICK SELECT
until
“Memory” appears on the display.
The current settings will be memorized.
G
Quick Select Defaults
H
Input Source
Volume
QUICK SELECT 1
BD
–40 dB
QUICK SELECT 2
SAT/CBL
–40 dB
QUICK SELECT 3
DOCK
–40 dB
n
Recalling the settings
Press
QUICK SELECT
at which the
settings you want to call out are saved.
The
,
or
indicator illuminates on
the display.
Naming quick select settings
See “Quick Select Name” (
v
page 61).
• The Quick Select function can be set separately for the different
zones (
v
page 40 “Quick select function”).
• If
QUICK SELECT
on the main unit
is pressed, the same function as
with the remote control unit can be
obtained.
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at “Source Delete” (
v
page 60). In this case,
store them again.
REC OUT mode
When using the audio/video recording connectors (DVR outputs), you
can record the audio or video from a different program source while
listening to the currently played track.
n
”Amp Assign” (
v
page 55) is set to ”ZONE2”
1
Press
ZONE2/REC SELECT
.
“ZONE2 Source” is shown on the display.
2
Turn
SOURCE SELECT
until “RECOUT
Source” is displayed.
The
indicator illuminates.
ZONE2 Source
ZONE2 TUNER
ZONE2 USB/iPod
····
RECOUT USB/iPod
RECOUT DOCK
RECOUT Source
····
3
Turn
SOURCE SELECT
to choose the input source to
be recorded.
• For operating instructions, refer to the respective equipment’s
operating instructions.
• To record FM or AM broadcasts, select the broadcast (
v
page 24).
4
Start recording.
• For operating instructions, refer to the respective equipment’s
operating instructions.
n
”Amp Assign” (
v
page 55) is set to other than
”ZONE2”
1
Press
ZONE2/REC SELECT
.
“RECOUT Source” is shown on the display.
2
Turn
SOURCE SELECT
to choose the
input source to be recorded.
• For operating instructions, refer to the respective
equipment’s operating instructions.
• To record FM or AM broadcasts, select the
broadcast (
v
page 24).
3
Start recording.
• For operating instructions, refer to the respective equipment’s
operating instructions.
• To cancel, press
ZONE2/REC SELECT
, then turn
SOURCE SELECT
until “ZONE2 Source” is displayed.
• Make a test recording before starting the actual recording.
• The digital signals are not output to the analog REC OUT connectors.
• As the digital audio signal input from the HDMI connector is not
output to the digital recording connector (OPTICAL), you should
connect using the OPTICAL and COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
• ZONE/DEVICE power button
• Muting button
• Master volume control button
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Delete” is selected at “Source Delete”
(
v
page 60) cannot be selected.
