Denon Professional DN-700AVP, Руководство по протоколу

Страница: 3 / 16

3
Introduction
Thank you for purchasing the DN-700AVP. At Denon Professional, performance and reliability mean as
much to us as they do to you. That’s why we design our equipment with only one thing in mind—to
make your performance the best it can be.
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit
denonpro.com .
For additional product support, visit denonpro.com / support .
General
The RS-232C serial remote control function is used by connecting the host machine such as a PC to
the device (DN-700AVP). The host can control the device by sending the Control command, and the
host can detect the current device status by sending the Status Request command.
In this document, the controlled equipment is called the Device (DN-700AVP) and the controlling
equipment is called the Host (PC, etc.).
RS-232C Control
The host can control the device by connecting a D-sub 9-pin straight
cable to the RS-232C connector on the rear panel of the device.
Specifications
Connector
9-pin D-sub male
Transfer Rate
9,600 bps
Data Length 8 bits
Parity None
Stop Bit 1 bit
Flow Control None
Pin Arrangement
Pin Number Signal Name
1
Ground
6 NC
2 TxD
7 NC
3 RxD
8 NC
4 NC
9 NC
5 S. Ground
RS-232C Straight cable