509.
IGNITE
INSTRUCTION MANUAL
COMPLIANCE INFORMATION
WARRANTY
IGNITE
QUICK SETUP INSTRUCTIONS
D
For added security, use the optional Velcro tether to
Secure the IGNITE battery pack to your goggle strap
D
Connect lens cable plug to IGNITE battery pack· port
D
Activate IGNITE's heating cycle as needed by pressing
and holding c.>button·
(see further instructions for different modes)
• Fully charge before first use
120 SECOND MODE INSTRUCTIONS
D
Press and hold 0 button for 3 seconds (BEEP 3x)
D
LED light will flash BLUE for the entire cycle
D
After 120 seconds, the IGNITE battery pack will
power off
ALWAYS ON MODE INSTRUCTIONS
D
Press and hold 0 button for 3 seconds [BEEP 3x)
D
Releaseo button and then press again for 1 second
(2 different BEEPS)
D
LED light will stay solid BLUE while this mode is in use
I[!] Turn off IGNITE battery pack by pressing 6 button
for 1 second (BEEP 3x}