Quick start:
Trocal LED Control & GHL Control Center
Page
3
of
5
2.
Illumination
In the
GCC
, up to 2 Tocal LED lights, each with 2 separate channels (i.e. a total of 4 channels) can be
programmed independently of each other.
Channel 1 and 3: Warm white; 4,000 K - Channel 2 and 4: Cool White; 6,500 K
2.1
In the sidebar, select an “
illumination
channel”.
In the following window up to 8 dimming
points can be set.
2.2
Select
and then enter your
desired time and brightness in the
window.
Confirm with
Note: The brightness at the start point
and end point of the illumination run
must always be set to 0%!
2.3
Repeat step 2.2 until the illumination run
corresponds to your wishes.
Tip: For a moon light setting select the
colder illumination channel 2 or 4.
2.4
To save the illumination run, click
in the menu.
The illumination run is then transmitted
to the device.
2.5
Repeat steps 2.1 to 2.4 for the other
illumination channel(s).
Tip:
If you are not sure what the optimum illumination run for your aquarium should be, you can find
some examples in the instructions manual of the DENNERLE Trocal LED Control. In the graphical
representation of the illumination curve, it is possible to change the previously programmed
illumination points comfortably with the mouse pointer. Please note that changes only take effect
after saving.
