a DM Group company
Dome Mounting
2040
Installation Manual
Sheet.
8
Dome Mounting
Once the 2040 dome camera has been configured it
can be fitted into the shell mounted in the ceiling. For
safety reasons, IT IS ESSENTIAL that the safety bond
is used to secure the dome to the shell. The safety
bond is fitted inside the shell and has a small metal clip
on the end of the cable. Offer up the dome camera
and secure the clip to the ring at the top of the clear
plastic case as shown in
(Fig. 11)
.
Having attached the safety bond insert the dome
camera into the shell, ensuring that the safety bond
does not become twisted around the case. Locate the
metal bayonet connector firmly into the top of the shell
and rotate the dome clockwise until the unit latches into
place
(Fig. 13)
.
To secure the unit in place, tighten the single locking
small screw on the hemisphere flange. If the screw
cannot be tightened the dome mechanism may not be
properly located in the bayonet connector. Remove the
unit and repeat the steps above until the dome clicks
into place and the screw can be tightened.
The 2040 dome camera is now ready for use. For
information on how to program and operate the camera
refer to the 2040 programming manual.
Fig.13 Offering Up
Fig.11 Safety Clip
