background image

5.   Securing Declination Angle 

Securing the declination angle will allow you to flip-up your loupe optics so that they 
pivot only on the upper joint.

5.1   To do so, securely tighten the lower hinge joint with a Phillips screwdriver. Increase or 

decrease the tension by tightening or loosening the upper screw.

5.2  Declination angle will be secured when optics are flipped up

5.1

5.2

5.1

5.2

6.  Cleaning and Disinfecting Lenses and Shields 

 

 Use the supplied cloth to clean the optical lenses and shields. A lightly moistened 
cloth with alcohol or eyeglass lens cleaner can also be used. DO NOT WET OR 
IMMERSE THE OPTICAL LENSES IN WATER OR LIQUID. For all other components 
such as the frames, nose pad and hinges, clean with an alcohol or disinfectant wipe. 
It is recommended that lens covers are used on the front of the loupes. These can be 
removed, cleaned thoroughly, dried and replaced on the loupes.

•  DO NOT SUBMERGE PRODUCT OR SUBJECT TO SURFACE SATURATION WITH ANY  

LIQUID OR ULTRASONIC CLEANER. Your product is not waterproof.

•  DO NOT CLEAN VIA AUTOCLAVE, CHEMICLAVE, GLUTARALDEHYDE, IODOPHOR, OR 

ANY OTHER STERILIZATION METHOD. 

• NO MODIFICATION OF THIS EQUIPMENT IS ALLOWED

7. 

 Storage 

When not using your loupes, store in the supplied carrying case with the lens covers 
in place (Legacy optics only). Avoid moisture and store in a dry environment.

denmat.com

Содержание PeriOptix Flip-up









Отзывы: