130884_BA_INT_001
6
12.2011
Technical Data
Type
External dimensions
Volume
Grit bin SB 100 / SB 100-O
975 x 705 x 460 mm
100 l
Grit bin SB 200 / SB 200-O
975 x 705 x 665 mm
200 l
Grit bin SB 400 / SB 400-O
1210 x 805 x 780 mm
400 l
Grit bin SB 550 / SB 550-O
1400 x 1070x 750 mm
550 l
Grit bin SB 700 / SB 700-O
1400 x1070 x 930 mm
700 l
Assembly / disassembly of the
chute
1. Hold the chute to the matching
boreholes from the inside.
2. Insert the screws through the
boreholes from the outside of the
front panel.
3. Then, put the washers on the
screws from the rear side before
screwing on the nut.
For better stacking conditions,
disassemble the chute in the
reverse
order.
Installation of the castors or feet
with support frame:
Turn the bin upside down. Insert the castor,
Item 12, (feet, Item 13) in the hollows in
the bin bottom.
Stick Item 10 and 11 together
as shown on the right. Align the resulting
frame with the castors Item 12 (feet Item 13)
in the hollows in a way that the boreholes in
the basic brace Item 10 and the boreholes in
the castors Item 12 (feet Item 13) arrange
into a line.
Make sure that the castors Item 12 can be
moved freely. Mark the drill template
received in that way and drill the boreholes
using a Ø 8 mm drill.
Turn the bin over, beat the screws in the
boreholes from the inside until the square part of the screw is completely in the plastic body.
Turn the bin upside down again. Now, put the parts on the screws as shown at top right and screw them together
with Item 15 and 16.
