DENIA LINZ WALL, Руководство по установке

Страница: 8 / 40

8
Ilustración 7.
Ilustración 8.
Nut 2
1
1º
2º
5) The stove has a regulating device (piece n°13) to adjust the inclination of the stove.
You need a metric key n°12 to handle this device shown on the illustration n°7.
Location of the regulating service
Firstly, remove the external nut (Nut 1). After that calibrate the stove using the
internal nut (Nut 2):

In clockwise direction to lift the stove

In counter clockwise direction to lower the stove
Fasten the external nut (Nut 1) after calibration of the stove.
Nut
Calibration of the stove