www.motoalliance.com
1-866-527-7637
3.
Place the plow mounting strap into
location as shown in figure 3. Secure with two
3/8-16 X 1 hex bolts, 3/8 flat washers and 3/8-16
lock nuts.
Tighten all hardware at this time.
Figure 3 -
Plow Mount Strap Location
Plow Installation:
1. Slide the plow into position with the
tubes under the ATV. Lift the end of
the tube assembly into position so
the holes in the tube wings line up
with the 3/8” holes in the frame
brackets (Figure 2).
2. A Phillips head screwdriver may be
used to align the holes. Insert both
3/8” pins and hook the retaining clips
on the ends of the pins to secure the
plow to the ATV.
3. The plate should now be a
permanent part of your ATV and will
not interfere with clearance. The
plow can be easily attached and
detached on the welded u-bolt with
the clevis hook on a winch or a
manual lift assembly.
Plow mount installation is now complete.
