1. Installing The Light Mount
DENALIELECTRONICS.COM
1.1 - Lower Light Mount Installation
Step One:
Locate the two OEM bolts that clamp the front forks on left and right side of
the triple tree. Starting on one side, remove the top bolt.
Step Two:
Rotate your Light mount bracket (a or b) side ways and bolt the top hole
onto the triple tree clamp using the provided M8 x 45mm Flanged Hex Head Screw (c).
Leave the bracket (a,b) loose enough to be able to swing.
Step Three:
Remove the lower OEM bolt from the fork clamp and rotate the light mount
bracket (a,b) down to align the mounting holes. Bolt it in place with a second M8 x
45mm Flanged Hex Head Screw (c) and properly tighten both.
Step Four:
Repeat the previous steps on the other side of the bike.
Step Five:
Use the hardware provided with your DENALI LED Light Pods to mount them
to the underside of the shelf on the installed Lower Light Mount Brackets (a,b) .
