1. Installing The Horn Mount
DENALIELECTRONICS.COM
1.1 - Clamp Installation
Note:
This clamp can be installed on pipes that range from 12 to 14mm in Diameter.
Step One:
Based on fitment and clearances, determine whether you will need to use the
optional 8mm spacer (b) and longer screws (c) to mount your clamp and RAM Charger .
Step Two:
Place the Clamp Bracket (a) over your bar in the desired location, make sure
the flat face is aimed towards you and the sloped faces point towards the windshield.
Step Three:
Align the mounting holes on the back side of the RAM Charger with your
bracket and secure it using the Socket Head Screws (c or d).
Note:
The whole assembly may have to be rotated downwards to have proper access
to your brackets (a) mounting holes.
