Pag
e
9
www.D
EN
A
LI
p
lu
s.
co
m
Fig. 4c
(Model CTR3)
NOTE:
When making the countertop, radius the corner of the cutout (1/4” radius is typical). This
will prevent cracking of the countertop. Follow manufacturer’s instructions regarding minimum
corner radius and reinforcement of corners.
Summary of Cutout Dimensions:
Model
Width
Depth
CTR1
11⅛"
11⅞"
CTR2
11⅛"
19⅛"
CTR2
19⅞"
18⅜"
Step #4 - Installing the Cooktop
1. Strips of foam sealant have already been installed around the outer edge of the underside of
the cooktop. This special sealant prevents liquid from infiltrating into the cabinet. Additionally,
the mounted sealant helps prevent damage to the countertop if the cooktop should ever need to
be removed for servicing.
2. Attach the mounting brackets supplied with the cooktop (refer to Figs. 6-7-8) to the
inside bottom surface of the cutout. The brackets are to be mounted on opposing sides. Center
the bracket in the opening, flush with the countertop and secure with long self-tapping screws
(included). Position the cooktop in the cutout opening and press firmly on all sides to seal the
frame into the sealant strips. Secure the cooktop to the brackets from underneath with the small
sheet metal screws that are supplied. There are two mounting brackets for the single and double
