DENAGO City 1.0, Руководство пользователя

Страница: 3 / 5

As you know the monitor is connected in a number
of ways to your eBike. It interfaces with the HMI to
adjust your PAS levels, advises if you have a
problem with your brakes and also tracks a number
of great features. Like speed, distance, MAX speed,
battery level etc. The following will show you how
to confirm and make needed adjustments
CS@BIKE.com or 1-877-755-2453(BIKE)
MONITOR-
SETTINGS
The following instructions will outline how to confirm and
make changes to your settings on your Denago City 1.0 eBike
Please perform a safety check and make sure to adjust your
MAX speed to a comfortable and confident speed. Enjoy the Ride
STEP 1 – Press and hold M
(MODE) Button until screen turns
to either MAX speed or AVE speed
STEP 2 Press and hold
+ -
(UP/Down)
Simultaneously for 2-4 seconds until screen
flashes and goes to setting interface. You
have 4 settings
Use the
+ -
to toggle thru each screen and the
M
to move to the next setting
1-inCH- wheel
size setting- Your
Denago City 1.0
is
27.5
2-LS- Limited
Speed. This is
your max speed
setting . See
Following Page.
3- bl – this is
screen
brightness.
You have 3
levels
4- unit – this is
the speed and
distance
setting MPH or
KPH
Please let us know if you have any comments and/or follow up questions!