© DENAFRIPS CO. LTD. & VINSHINE AUDIO PTE. LTD. (SINGAPORE)
ALL RIGHTS RESERVED
3.3
Rear Panel
Figure 2.
Read Panel
Description:
(1)
AC Power Supply
CAUTION!
AVATAR supports worldwide AC mains, range from 100-250VAC. The Please use a
good quality power cord with earth/ground pin connected
(2)
Digital Signal Output #1 (Async)
There are two groups of Digital Output. Digital Output #1 uses the internal Crystal Oscillator
Clocks. Select the dip switch to
Async
and connect any of the digital output interface of this
group to an external DAC. All output are active simultaneously.
(3)
Digital Signal Output #2 (Sync)
Digital Output #2 uses the external Master Clock input (45.1584MHz). Select the dip switch
to
Sync
and connect any of the digital output interface of this group to an external DAC.
(4)
Function Selector
Async – Toggle the SW1 to
down
position to use the internal clock
Sync – Toggle the SW1 to
up
position to set the CDT to use the external clock
Filters - Toggle the SW2 to
up
position for Slow filter,
down
position for Sharp filter.
Sampling Rate – There are 4 sampling rates to choose from. Both SW3/4 at
down
position output native Redbook CD sampling rate at 44.1kHz. SW3(
down
)/SW4(
up
)
for 88.2kHz, SW3(
up
)/SW4(
down
) for 176.4kHz, SW3(
up
)/SW4(
up
) for 352.8kHz,
1
2
3
4
