1. Getting acquainted with your High Pressure Cleaner
HB-200 V00
Page 4
Unpacking
Remove the high-pressure cleaner and its accessories from the packing material. For transport
and packing reasons some accessories may be supplied disassembled.
Make sure all components are present:
Machine
Electrical cord (attached)
10m High pressure hose w/ Male and Female Quick Coupling
Machine Installation
/ Setup
Step 1:
Ensure machine is place on a flat floor or inclined position not more than 10
.
Step 2:
Insert the male quick coupling end of the high pressure hose (included) into the inlet
female quick coupling of the machine and connect the female quick coupling end to the outlet
of the cold water machine.
Step 3:
Connect the complete assembled spray lance and trigger gun of the cold water
machine and insert the female quick coupling end to the outlet male quick coupling of the
machine.
Step 4:
Plug in the power-plug into a main power supply socket and turn on the power.
Switch on both the high-pressure cleaner and HB-200 by depressing the on/off switch.
Inlet of HB-200
Connect to Inlet of
HB-200
Connect to outlet of
cold water machine
10m Hose w/ Male and Female
Quick Coupling
Outlet of HB-200
Connect to outlet of
HB-200
