C-110-170-200E R11
Page 7
5)
A
lways keep the High Pressure Cleaner and its accessories in good working condition.
Check the machine for defects, especially the insulation on the electric cable. Do NOT
start up the machine if there is any defect. Have the machine serviced.
6)
W
hen using the High Pressure Cleaner and its accessories, eye protection must be worn
to protect against repelling or ricocheting matters causing eye damage.
7)
S
uitable
clothing and footwear must be worn while using the equipment to protect the
operator. Do not try to clean clothes or footwear with the machine.
8)
P
recautions must be made to keep bystanders away from the working range.
9)
D
o NOT spray-clean on yourself, others or live animals. The
high-pressure beams are capable of making severe injuries.
10)
D
o NOT spray at electrical equipment OR the machine itself.
11)
W
hile repairing or servicing the equipment and its accessories, always make sure the
machine is turned off and disconnected from the main power supply.
12)
O
nly allow instructed personnel to operate the machine.
13)
A
ctivating the trigger/gun can cause backward force therefore always hold spray lance
with both hands.
14)
W
hen pausing during operation, turned off the main switch of the machine and ensures
that the trigger/gun is locked.
15)
O
nly use high-pressure hoses, connections and nozzles specified by
DEN-SIN
.
16)
IMPORTANT
– Do not use the machine in a possible explosive environment in
accordance with EN-50014.
2. Safety and protection information
General safety & application guidelines
1)
I
t is not allowed to clean asbestos containing surfaces with high-pressure, unless using
special equipment.
2)
P
ersons under the influence of alcohol, drugs or medicine should not operate the machine.
3)
D
o not touch plug and socket with wet hands.
4)
T
his machine has been constructed for use with Nilfisk-ALTO detergents. The use of
other detergents or chemicals may cause problems as to the operation and the safety.
5)
W
hen using detergents the instructions should always be strictly observed.
6)
A
lways flush the machine with clean water after use of chemical/detergents.
7)
A
lways unplug power supply when cleaning and maintaining the machine.
8)
D
o NOT use the machine if important parts are damaged – i.e. safety devices, high-
pressure hoses, spray handle.
9)
T
he user is obliged to observe all national working environment and working safety
regulations concerning “operation of high-pressure washers”.
10)
I
t is not allowed to connect this machine directly to a potable water supply.
Содержание C-110E
Страница 20: ...C 110 170 200E R11 Page 19 Chassis assembly...
Страница 23: ...C 110 170 200E R11 Page 22 Pump assembly...
