Page
3
of
6
IMPORTANT MAINTENANCE INFORMATION
The easiest and guaranteed method not to scratch or damage in any way diffusers in PMMA (of any color) during the
cleaning process, is by simply washing with slightly wet warm clean rag, remember to always use a mild soap, detergent.
Any halos that can be created after using soap and water are removed with ease by using a dry sponge (not abrasive). If
washing is carried out with demineralized water, allow the diffuser to dry without applying the sponge.
Use a microfiber cloth, but those with a smooth surface (not a honeycomb or with evident discharge of fibers). With that,
just wet with water and squeeze out well (must remain slightly damp) with this method you can also clean the screens of
TVs and PCs.
Do not use any type of aggressive product (Vetril, Glassex etc. that are very damaging to the plastic surfaces). At best, if
the diffuser is very dirty or greasy and you can not only clean with water, dilute a mild soap and then rinse, always with a
microfiber cloth.
TIPS FOR USING
‘
SensoSphere-Learning Aid
’
•
Because of its interactive features, the
‘
SensoSphere-Learning Aid
’
is
highly sensitive to vibrations
.
When interacting with it, avoid tapping, jolting or moving it. Proper User Interface and Sphere sensitivity
operation, requires that there be
no obstruction
objects closer than five inches (125cm) from the North pole.
It should be in a location where there would be minimum vibrations but still in eye view and not behind child.
It should not be located near child due to movements and jarring, subject to vibrations.
•
This device cannot be floor mounted due to floor vibrations.
•
Make sure the
‘
SensoSphere-Learning Aid
’
is perfectly flat on its four feet so that it does not wobble
when touched. If needed, you can adjust the height of each foot with a slight leg rotation.
•
Hand Swipe Gestures interactivity may not function while the
‘
SensoSphere-Learning Aid
’
is exposed
to direct sunlight. It should only be used indoors.
•
The Power Converter cord is ten feet in length and should be plugged into Power Surge Protection bar
(recommended) for easy on/off control. If necessary, a power cord extension can be used to connect to Power
Surge Protection bar.
How a teacher, as tutor, would use this therapy with single student or classroom overall
The
SensoSphere-Learning Aid,
should be placed in a room at forward eye level or higher front or side of sight where
student or students are present. Position on a shelf or table, but not on the floor. Moreover, it should be placed in an area
where there are no vibrations from walking or other sources. There is no upper time limit for this therapy. The color light
therapy device should be used for all homework assignments and weekend study periods. You will notice some behavior
changes in a few weeks. The exposure should be majority
Relaxation mode
(turquoise-blue color). If necessary due to
hyperactivity or anxiety, use Balance mode (magenta color) first. This therapy can also be used by the entire family in
entertainment center for stress relief in
Relaxation mode
. It will greatly enhance any room ambiance with beautiful color.
In addition,
SensoSphere-LearningAid
has music interactivity available to further your enjoyment. You will never get
bored since it uses complex algorithms programmed to always change configurations, patterns, and color along with the
specific desired entrainment range required for targeted therapy. We have now added
Sleep Mode
for individuals with sleep
issues which should be used prior to sleep time. It can also be used in bedroom as a sleep light.
