Rev. A, February 2021
Page 1
Pro-Tacker Operator’s Manual
1
Safety Precautions
Safety precautions for operating personnel and equipment:
WARNING 1
: Operating personnel should perform only the procedures described and
recommended in this manual. These manual covers procedures pertaining to the use of the
Pro-Tacker Hot Air Welder.
WARNING 2
: To avoid serious injury always operate ensure the user does not make direct
contact with the barrel of the Pro-Tacker while in use.
WARNING 3
: The locations of potentially dangerous voltages and other hazards are
identified and labeled on the equipment. Be careful to observe these warnings when installing,
operating, maintaining, or servicing the equipment. Observe all warnings in this manual.
WARNING 4
: Ensure proper electrical connection prior to use, failure to do so may lead to a
dangerous shock to the user.
WARNING 5
: This product is intended for operator attended operation only. This product
should never be left unattended while plugged in. Failure to do so may cause injury to the user
and/or damage the Pro-Tacker.
WARNING 6
: The Pro-Tacker can ignite flammable fluids and gases, ensure there are no
flammable fluids and/or gases near the surface of interest, failure to do so may injure the user
and/or cause damage to the Pro-Tacker.
CAUTION 1
: Observe the precautions given on the equipment and within this manual to
prevent damage to the equipment.
CAUTION 2
: Unauthorized personnel should not remove from the equipment those panels or
covers that are provided for protection and/or require a tool to remove.
CAUTION 3
: A damaged housing and/or operation without properly fastened protective
covers may cause electrical shock to the user.
