background image

 

Rev. A, January 2021 

Bone-Cutter Operator’s Manual                                                                                                                                  

2

 

 
 

1

 

Safety Precautions 

 
 

Safety precautions for operating personnel and equipment: 

 

WARNING 1

:  Product has functional sharp edges. Contact may result in injury. Always 

keep fingers and body away from all sharp edges. 
 

WARNING 2: 

Keep fingers and body away from lever mechanism during operation.  

 

CAUTION 1

: Observe the precautions given on the equipment and within this manual to 

prevent damage to the equipment. 

 

CAUTION 2

: Unauthorized personnel should not remove from the equipment those panels 

or covers that are provided for protection and/or require a tool to remove. 

 

CAUTION 3

: Place the Bone-Cutter on a stable and level surface prior to loading and 

cutting samples. 

 

CAUTION 4

: Ensure all hardware is fastened correctly, failure to do so could injure the 

user and/or damage the product. 

 

CAUTION 5

: Loading any material or items outside of the products designed use can 

cause injury to the user and/or damage the product. 

Содержание Bone-Cutter BC-100/A













Отзывы: