Demtech 500-0100/XL/A Скачать руководство пользователя страница 28

 

 

 

9.2

 

Appendix B 

Warranty 

 

DEMTECH Services, Inc. warrants all equipment of its manufacture to be free from defects in 
materials, workmanship, mechanical parts, and labor for a period of one year from the date of 
shipment to the original buyer and ninety days for electrical.  This warranty excludes normal wear 
items such as gears, bearings and chains.  The liability under this warranty is limited to replacement 
parts and labor on equipment when the equipment is returned prepaid to the factory or its authorized 
service center with prior authorization from DEMTECH Services, Inc., and upon examination by 
DEMTECH Services, Inc., is determined to be defective.  At DEMTECH Services, Inc.'s option, 
a service representative may be dispatched to the equipment location. 

 

As an additional protection, DEMTECH Services, Inc. warrants that for a period of 90 days from 
the date of shipment to the original buyer, pending prior authorization from DEMTECH Services, 
Inc., there will be no charge for service related shipping of parts and/or equipment or for authorized 
travel of a service representative to the equipment location.    After 90 days, all costs incurred for 
shipping the equipment or parts thereof or for travel are the responsibility of the buyer.  Our warranty 
for this equipment is rendered void if the unit has been repaired,  taken  apart or modified, or 
attempted to be, unless such actions have been taken in accordance with written instructions 
received  from  DEMTECH  Services,  Inc.    The  warranty  is also void if the equipment has been 
subjected to abuse, accident or other abnormal conditions. 

 

IF ANY FAULT DEVELOPS, 

THE FOLLOWING STEPS SHOULD BE TAKEN: 

 

1.

 

Notify DEMTECH Services, Inc. by calling 1-888-324-9353.  Overseas customers should 
contact the local DEMTECH authorized service center.  Please be prepared with the model 
number, serial number and full details of the difficulty.  Upon receipt of this information, 
service data or shipping instructions will be provided by DEMTECH Services, Inc.  Do not 
return the unit for repair without first contacting the factory or its representative for 
instructions. 

2.

 

After the initial 90 day period, on receipt of shipping instructions, forward the equipment 
prepaid to the factory or its authorized service center as instructed.  If requested, an 
estimate of the charges will be made before work begins, especially with those cases where 
the DEMTECH Services, Inc. product is not covered by the warranty. 

3.

 

If the original carton and packing are not available, the product should be packed in a 
container with a strong exterior and surrounded by a protective layer of shock-absorbing 
material.  DEMTECH Services, Inc. advises returning the equipment at full value to the 
carrier. 

 

DEMTECH Services, Inc. reserves the right to make changes in design at any time 
without incurring any obligation to install the same changes on units previously purchased. 

 

This warranty states the essence of the obligations or liabilities on the part of DEMTECH 

Services, Inc.  THE FORMAL, COMPLETE AND EXCLUSIVE STATEMENT OF 
DEMTECH SERVICES, INC.’S WARRANTY IS CONTAINED IN ITS QUOTATIONS, 
ACKNOWLEDGEMENTS AND INVOICES.  DEMTECH Services, Inc. neither assumes, nor 
authorizes any person to assume for it, any liability in connection with the sale of its equipment 
other than those set forth herein. 

Содержание 500-0100/XL/A





























Отзывы: