10
Spot MAX
SAFETY INSTRUCTIONS
WARNING: Before using the battery charger
Read the user manual carefully.
Always connect the mains cable of the device to a
grounded outlet. Make sure of the grounding.
The device is suitable for indoor use only. Do not expose to
rain or excessive moisture.
Consider spark formation during welding.
Keep flammable materials, gasoline, oil, thinner etc. away
from where the machine is operated.
CONNECTION
- Avoid using the input cable of the device with an extension cord.
When using with cable reel, make sure the reel is completely
emptied.
- Do not operate the device with a damaged power supply cord or a
damaged power plug.
- Check all cables frequently for possible damage. If a damaged or
non-insulated cable is detected, repair it immediately or replace it
with a new one of the same cross section and type.
-
Always use the handles when moving the device. Never try to
move it by pulling on the cables.
- All covers, panels etc. of the machine. keep guards closed and
locked.
