13
Welder's clothes must be used for spot
welding applications. Synthetic
materials should be avoided as they will
burn quickly due to welding sparks.
Keep flammable materials, gasoline, oil,
thinner etc. away from where the
machine is operated.
Fire extinguisher tubes and materials
must be available at all times in order to
ensure fire protection against fire in the
welding environment.
Protection agains noise
If the noise level is high, wear approved
ear protectors.
Protection against
electromagnetic interferance
This machine is designed for operation
in the industrial zone and according to
CISPR11, the 2nd group is a class A
device. The use of the grid in residential
areas can cause difficulties in terms of
noise transmitted or emitted in
ensuring electromagnetic compatibility.
The user must install and operate this
machine as described in the manual. If
any electromagnetic interference is
detected due to the operation of this
machine, the user should take
corrective measures to reduce or
eliminate these effects.
Check the electromagnetic immunity of
equipment’s operating near the
working area.
The user must ensure that all
equipment in the work area is
compatible. Otherwise, additional
protection measures may be required.
These measures will depend on the size
of the work area, the shape of the
building and other activities in the work
area.
To prevent possible EMC damage,
perform your welding operations as far
as possible (100m) from your sensitive
electronic devices.
If changes are made or the machine is
included in integrated equipment,
compliance with the standards should
be checked again.
Protection against
installation errors
The device is suitable for indoor use
only. Do not expose to rain or excessive
moisture.
Keep all covers, panels etc. of the
machine closed and locked.
Waste procedure
This device is not domestic waste. It
must be directed to recycling within the
framework of theEuropean Union
directive and national laws.
Obtain information from your dealer
and authorized persons about the
waste management of your used
machines.
14
TRANSPORT RULES
Cautions during delivery
First remove all packing material on the machine.
Make sure that all the items you have ordered have arrived. If any material is missing
or damaged, contact your place of purchase immediately.
In case of damaged or incomplete delivery; Keep a record, take a picture of the
damage and report to the carrier with a copy of the transport note.
In case of damaged or missing delivery; make a record, take a picture of the damage
and report to the carrier and the company you purchased with the copy of the
shipping note.
The standard package for the Spot ALU includes:
- Main machine and mains cable connected to it
- Trolley
- Dent Puller (Slide Hammer), 2 meter power cable and switch cable
connected to it.
- Work cable connected to main machine and copper plate attached to it
- Consumables box
- User manual
Packing
The machine can optionally be on the pallet. Consider the specifications for package
dimensions and weight.
Storage
When the machine is not used for a long time, store it in a dry place with ambient
temperature between 0 ° C and + 40 ° C, and not in contact with rain.
GENERAL INFORMATION
Spot ALU is a set of aluminum body puller used to work on the dent of the vehicles
with aluminum chasis and panels. It is also suited to work on steel dent pulling of
UHSS panels with minimal heat affect.
Voltage Selection
Trigger Mode
Selection
On - Off
