5.
Trim splash shield according to photosand install. Note: Lower photos showwhere ears of splash panel will haveto be trimmed off.
Страница 1: ...1 4 Hex Bolt Gr 5 2 00060 8 3 8 Lockwasher 3 00059 2 3 8 Flatwasher 4 00061 8 3 8 16UNC Hex Nut 5 07280 2 10mm x 1 25 x 30mm Hex Bolt Gr 8 8 6 07284 2 10mm Lockwasher 7 07971 35 1 Left Mounting Bracket 8 07972 35 1 Right Mounting Bracket 9 07973 35 1 Cross Member 10 07974 35 1 Center Support 9517047 PARTS LIST Please order replacement parts by PART NO and DESCRIPTION 95 97 Honda Odyssey 1 2 3 4 5 ...
Страница 2: ... be sure they have read and understand the proper operating procedure DO NOT use worn or damaged cables and or pins Be sure the SAFETY CABLES are hooked chassis to chassis to both the towing and towed vehicles using the crisscross method Check clearance between vehicles in a turning situation Checkbaseplatemountingboltsfortightnessandframeformetalfatigue Do not load the towed vehicle with anything...
Страница 3: ...aking two bolts out of vehicles center brace NOTE Be sure to leave in the third bolt only remove two bolts Attach centersupporttovehicleusingtwo10mm x 1 25 x 30mm bolts and 10mm lockwashers Snug tighten these bolts and secure front of support using two 3 8 x 1 1 4 hex bolts lockwashers flatwashers and hex nuts Push cross member up and tighten all bolts NOTE Center support brace goes on top of base...
Страница 4: ...5 Trim splash shield according to photos and install Note Lower photos show where ears of splash panel will have to be trimmed off ...
