Demco Tow-It 2, Руководство оператора, Страница: 5 / 24

Page 5
SAFETY SIgN CArE
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replace parts that displayed a safety sign should also display the current sign.
•
Safety signs are available from your distributor, dealer parts department, or the factory.
How to install safety signs:
•
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
rEMEMBEr
Your best assurance against accidents is a careful and responsible operator. If there is any portion of this manual or function
you do not understand, contact your local authorized dealer or the manufacturer.
LIgHTINg AND MArKINg
It is the responsibility of the customer to know the lighting and marking requirements of the local highway authorities and
to install and maintain the equipment to ,provide compliance with the regulations. Add extra lights when transporting at
night or during periods of limited visibility.
Lighting kits are available from your dealer or from the manufacturer.
SAFETY...YOU CAN LIVE wITH IT
EqUIPMENT SAFETY gUIDELINES
Every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach
to handling equipment. You the operator, can avoid many accidents by observing and following precautions in this section.
To avoid personal injury, study the following precautions and insist those working with you, or you yourself, follow them.
In order to provide a better view, certain illustrations in this manual may show an assembly with a safety shield removed.
However, equipment should never be operated in this condition. Keep all shields in place. If shield removal becomes
necessary for repairs, replace shield prior to use.
Replace any caution, warning, danger or instruction safety decal that is not readable or is missing. Location of such decals
is indicated in this booklet.
Do not attempt to operate this equipment under the influence of alcohol or drugs.
Review safety instructions with all users.
Operator should be a responsible adult.
DO NOT ALLOw PErSONS TO OPErATE Or ASSEMBLE THIS UNIT UNTIL
THEY HAVE DEVELOPED A THOrOUgH UNDErSTANDINg OF SAFETY PrECAUTIONS AND HOw IT wOrKS.
Do not paint over, remove, or deface any safety signs or warning decals on your equipment. Observe all safety signs and
practice instructions on them.
Never exceed limits of a piece of machinery. If its ability to do a job, or to do so safely is in question-
DON’T TrY IT
.