Demco 9518080, Руководство оператора

Страница: 4 / 12

7. Install right and left frame mounts. Put proper side up and push 7/16
”
bolt through hole
and start 7/16
”
lockwasher, and hex nut. Start 10mm x 1.25 punch lock nut over factory
stud. Push mount up so angle is fl at on front of frame, and clamp with C-clamp. Snug
previously mentioned fasteners. Drill 5/16
”
holes through frame using mount as a template
(three on each mount).
8. Remove top bumper bolt on each side and install brace with 8mm x 1.25 x 25mm
bolt, 8mm lockwasher, and 8mm fender washer. Secure bottom of brace to frame
mount using 3/8
”
x 1-1/4
”
bolt, 3/8
”
lockwasher,3/8
”
fl atwasher, and 3/8
”
hex nut.
We require that “
R
Blue” be used on all bolts.