DEMA CPM 311, Руководство пользователя

Страница: 157 / 213

- 157 -
Settings » Automatic Control Settings » Output Relay Settings
A.
Output Relay Settings
window is accessed by clicking the
Output Relay Settings
button in the
Automatic Control Settings window.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are
to be applied to CPM 311 unit,
Save to Device
button must be utilized, which is located under the
Buffer
tab.
1. On the very left of these columns; thresholds (e.g. I> and I
e
>), time delay protection functions
(e.g. tI> and tI
e
>), function status (e.g.
ARCL running
) and CB control functions (e.g.
Trip
and
CB
close
) are listed; to the right of this list, current appointments are indicated in columns of boxes,
each aligned to the related output numbers.
2. These boxes let the user to assign or cancel assignment of functions to each of the programmable
outputs. Note that it is possible both to assign more than one function to a single output, and to
assign a single function to more than one outputs.
This area is the continuation of the first and second areas, which were just studied on the
previous paragraphs. On the above sample window, it is observed that
CB Close
function is
appointed to output no.2. □