INSTRUCTIONS
1. Remove the unit from the packaging, attach the nozzle assembly to fog mast with
screw provided with allen wrench provided. Connect the black tube into the tee labeled
with a black ring, attach the clear tube into the other tee on the fog nozzle assembly.
2. Fill the 10 gallon tank with the solution to be fogged.
3. Place the unit in the area where fogging is needed, adjust mast to desired height,
wearing proper safety equipment plug a compressed air line into the unit and evacuate
the area.
4. Unplug the unit from air when finished.
Caution!
Always wear a respirator, earplugs, gloves, eye wear, and protective
clothing if unable to avoid exposure to chemicals. All personnel should
be in protective equipment or evacuated from area before fogging.
Never discharge toward or near electrical outlets or equipment.
RETURNS: NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA’S WRITTEN PERMISSION.
RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED IN ADVANCE OF RETURN.
WARRANTY:
DEMA products are warranted against defective material and workmanship under normal use and service for one
year from the date of manufacture. This limited warranty does not apply to any products which have a normal life shorter than one
year or failure and damage caused by chemicals, corrosion, improper voltage supply, physical abuse, or misapplication. Rubber and
synthetic rubber parts such as “o”- rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered
under warranty. This warranty is extended only to the original buyer of DEMA products. If products are altered or repaired without prior
approval of DEMA, this warranty will be void.
Defective units or parts should be returned to the factory with transportation prepaid.
If inspection shows them to be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes no liability
for damages. Return merchandise authorization number, to return units for repair or replacement, must be granted in advance of return.
Pg. 5 of 5
I-932
