EC9100i Series Scanner User Guide
Maintaining your scanner
©2021 RDM Corporation
Page 26
Installing the endorser inkjet cartridge
When you place the new inkjet cartridge into the holder, make sure that you insert it at the angle
described in the following steps. If you do not insert the cartridge properly, it might not make contact
with the document when it is scanned.
1.
Remove the endorsement printer cover.
2.
Pull the inkjet latch away from the inkjet cartridge (as pictured).
3.
Pull the inkjet cartridge out of the scanner.
4.
To insert the new inkjet cartridge, pull the inkjet latch back
and place the inkjet cartridge into the holder. The
cartridge needs to be at an angle so that the back of the
cartridge is lower than the front of the cartridge.
5.
Push the cartridge down into the holder until the cartridge
snaps into place.
Once installed, the inkjet cartridge sits on a slight angle
with the back of the cartridge lower than the front.
6.
Make sure there is no gap between the inkjet cartridge and the endorsement channel.
7.
Replace the endorsement printer cover.
How to Install Inkjet Cartridge
Alternatively visit:
https://www.youtube.com/user/RDMCorporation/playlists