DeLUX DPX12T, Руководство по установке и эксплуатации

Страница: 59 / 383

4/3/2014
Instance Parameter
Factory
Setting
DELUX
Setting
Parameter Description
a
I
Analog Input
sen t[ r0.1k
Selects the type of sensor used
rt.l 2 3
Selects the leads in sensor
f
i
l
0.5 10
Filters erratic signal, for smoother PID calculations
i
.er
off off
Forces manual clear of input errrors
de[ 0 0.0
Selects precision of displayed units
loop
PID Loop
h.a9
p
i
d
off
Selects the heat control method
[.a9 off
p
i
d Selects the cool control method
[.[r off off
Enables or disables cool output curve
t.tun no no
Enables or disable TRU-TUNE+ adaptive tune automatically
t.a9r
[r
i
t [r
i
t Selects the aggressiveness of the autotune funtion
ufa user m7an
Selects what output will do when user switches to manual mode
fa
i
l
user m7an
Selects what ouput will do when an input error switches control to manual mode
m7an 0.0 -27.0
Defines the default manual output power if user swiches control or fault
l.de no no
Enables or disables open-loop detction feature to monitor closed-loop operations
rp off off
Selects when controller will ramp to setpoint
l.sp -1999 10.0
Defines the lower range of the PID setpoint (temperature in automatic mode)
h.sp 9999 300.0
Defines the upper range of the PID setpoint (temperature in automatic mode)
sp.lo -100 -100
Defines the lower range of the PID setpoint (% output in manual mode)
sp.h
i 100 0
Defines the upper range of the PID setpoint (% output in manual mode)
otpt
Output
o.ty volt volt
Selects the type of output
fn heat [ool
Selects which function will drive output
f
i
1 1
Selects the instance of the function selected above
s.lo 0.00 0.00
Defines the lower range of the scale for the universal process output
s.h
i
10.00 8.00
Defines the upper range of the scale for the universal process output
o.lo 0 0
Defines the low power scale, output will never be less than the value specified
o.h
i
100 100
Defines the high power scale, output will never be less than the value specified
o.[a 0.0 0.0
Defines an offset value to the process output
alm7 1
Alarm 1
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
2
Alarm 2
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
3
Alarm 3
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
4
Alarm 4
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
fun
Function
lev
h
i
9h h
i
9h Selects the state in which the EZ key is in when powered up
fn none none
Selects the funtion of the EZ key
f
i
0 0
Selects which instance the EZ key will affect
9lbl
Global
[...f f f
Selects the unit of measurement
a[.lf 60 60
Selects the AC line frequency
[om7
Communications
ad.s 1 1
Sets the network address of this controller
[...f f f
Selects UOM in which this communications channel will display
nu.s yes yes
Determines whether all values written to control will be saved in EEPROM
Menu
Watlow EZ-ZONE Moisture Controller - Configuration Record
Setup Page
To reach the Setup page hold the "up" and "down" arrow keys together for 6 seconds .