3
IMPORTANT SAFETY INSTRUCTIONS & WARNINGS
1) SAVE THESE INSTRUCTIONS – This manual contains important safety and
operating instructions for the 3-in-1 Vehicle Repair Kit, P/N 043-1002-HY-WH
2) Read all warning labels and instructions. Operating instructions must be
understood before using equipment. Never remove labels from equipment.
Replace missing, worn or damaged labels. Always wear safety goggles and
protective clothing when using hydraulic equipment.
3) Fully support each jack or ram at its base.
Every jack or ram, whether used individually or in a system, should be completely
supported on a solid, firm, non-sliding foundation capable of supporting the load.
4) Center the load on the lifting point.
The load must be centered on the ram, or equally distributed on multiple rams.
Off-center loading can result in the ram slipping out and loss of the load.
5) Block or crib load as it rises.
Place blocking or cribbing under the load as you raise it. Each time you raise it
higher, insert more blocking. Position yourself in a manner that will keep you
clear of the load, and will not allow your hands or other body parts between the
load and the cribbing.
4
6) Do not use rams as permanent supports.
Hydraulic rams are not meant to be used as permanent supports, but are
designed to lift and lower. If you need to hold the load for any length of time,
place blocking or cribbing under the load.
7) Apply parking brake and chock tires before lifting vehicle.
8) Do not exceed rated capacity.
9) Before use, read manufacturer’s instruction manual for the vehicle (or object)
you will lift.
10) Keep clear of load while lifting and lowering.
11) Lift vehicle only at manufacturer-recommended locations.
12) Inspect before every use; do not use if parts loose or damaged.
13) Do not work under the vehicle without properly supporting the vehicle with jack
stands.
14) Avoid dangerous oncoming traffic. Use the Jack as far away from the roadside
as possible.
15) Before lowering the Jack, remove all tools and equipment from under the
vehicle.
16) The warnings, precautions, and instructions discussed in this manual cannot
cover all possible conditions and situations that may occur. The operator must
understand that common sense and caution are factors, which cannot be built
into this product, but must be supplied by the operator
17) This product is not designed to be used by children.
18) Do not modify the equipment in anyway.
19) Do not use any accessories that are not recommended by the manufacture.
20) Hyperion® is not responsible for any loss caused by an accident or for
providing any support regarding the outcome.
