Delton TAKDIR V32S, Руководство пользователя

Страница: 12 / 16

10
5.Maintenance
5.7 Installation of the water tank
(some model with this function)
1. Insert the front end of the water tank into the mop, align as shown in the figure, and paste the
mop on the magic tape of the water tank.
3. Place the bottom of the machine upward, align the positioning column of the water tank
with the positioning hole of the carriage at the bottom of the machine, and press the water
tank tightly.
2. Open the inlet on the water tank and slowly inject the water into the water tank.
*The water tank has no function of closing water seepage, and it will start to seep after water
injection. Please remove the water tank before charging.
*Pay attention when using the water tank, add water or clean up in time, please remove the tank
before adding water.
*Please do not use a water seepage tank on the carpet. When using the water tank to mop the floor,
please fold up the edge of the carpet, so as to avoid foreign matters on the rag from polluting the
carpet.
*After cleaning the mop, it is necessary to dry the mop until it does not drip, and then install it on the
water tank. At the same time, the mop needs to be flat.