INSTALLATION
35 mm
c
a
n
c
e
llo
Fig. 1
Fig. 3
2-3mm
Fig. 4
G
Fig. 2
Position the plate provided
(Fig. 1) 35 mm/MAX
from the
edge of the gate and perfectly
square at an angle of 90°.
Before fastening the plate with
cement, dowels or other means,
thread the cable sheath(s)
through the prepared holes.
Position the operator and
fasten it with the bolts
provided.
(Fig.2).
Fasten the rack to the gate
firmly, leaving a distance of
between 2 and 3 mm from the
motor pinion
(Fig.3).
Fasten the limit stop plates
(Cams
G
) of the motor on the
rack,
(Fig. 4)
1. Insert the key provided into
the appropriate cylinder and
turn the key.
2. Pull the lever until it stops
Emergency release
Rack
Plate
holes cable
passage
Wheel
G
a
te
