Using the CardioQ-ODM Monitor in the OR
© Deltex Medical 2013
9051-5480 Issue 3
7. Locate descending aortic waveform
(
gently
rotate or adjust depth as necessary).
8. Optimise waveform
(sharpest sound, tallest
peaks, spectrum of colours).
9. Use Auto gain if necessary.
1. Turn on the CardioQ-ODM
(use the switch at the back of the monitor).
2. Attach a probe to the interface cable.
3. Select “New Patient”.
4. Input patient data (patient ID, gender, age, weight, height).
Use Control Knob to input
data and press enter, check and then accept data.
5. Apply water-based lubricant to distal part of probe.
6. Insert probe, bevelled edge upwards
(
patient incisors usually between distal & middle
markers for oral insertion or middle & proximal for nasal insertion).
Oral Insertion
Nasal Insertion
