ASSEMBLE THE FLOATING PULLEY ASSEMBLY USING THE 4-1/2” PULLEYS (
K
), THE
PULLEY FLANGES (
I
), THE M10 x 45MM BOLTS (
R
), THE 10MM FLAT WASHERS (
V
), AND
THE 10MM LOCKNUTS (
T
).
FLOATING PULLEY ASSEMBLY
(NOTE: THE NUTS USED ON THIS
BENCH ARE LOCK NUTS, THIS MEANS
YOU MUST TIGHTEN THEM DOWN
PAST THE PLASTIC INSERT.)
K
R
V
V
T
I
