ATTACH THE FRONT LEG ASSEMBLY TO THE BODY (
E
) USING THE M10 x 70MM BOLTS (
L
),
THE M10 WASHERS (
N
), AND THE M10 LOCK NUTS (
0
).
ATTACH THE REAR FOOT (
A
) TO THE BODY (
E
) USING THE M10 x 70MM BOLTS (
L
), THE M10
WASHERS (
N
), AND THE M10 LOCK NUTS (
0
). NOW SLIDE THE RUBBER SHOES (
I
) ON THE
REAR FOOT (
A
).
INSERT THE LEG TUBE (
G
) INTO BODY (
E
). SLIDE THE LEG PADS (
D
) ONTO THE TUBE AND
SECURE THEM WITH THE MUSHROOM CAPS (
K
)
ATTACH THE BACKREST (
F
) TO THE BODY (
E
) USING THE M10 x 25MM BOLTS (
M
) AND THE
M10 FLAT WASHERS (
N
).
PUSH THE SQUARE CAPS (
J
) INTO THE ENDS OF THE BODY (
E
).
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM PERIODICALLY TO MAKE
SURE THEY ALWAYS STAY TIGHT.
MAIN ASSEMBLY
F
D
K
G
J
I
I
A
J
E
M
L
L
N
N
N
N
O
N
O
(NOTE: THE NUTS USED ON THIS
BENCH ARE LOCK NUTS, THIS MEANS
YOU MUST TIGHTEN THEM DOWN
PAST THE PLASTIC INSERT.)
