Deltec CADD-Prizm VIP PCA 6100, Информация для пациентов

Страница: 25 / 34

23
2000-03-08 D. Zurn
«Prizm w/plain
Remote Dose 8/96»
Data
In/Out Jack
Connector
Red Mark
Remote Dose Cord
When the Remote Dose Cord is attached you may deliver a
dose by pressing either the Remote Dose Cord button, or the
Í
Key. If you need to attach the Remote Dose Cord to the
pump, follow the steps below.
WARNING: Do not place the Remote Dose Cord where the
button might accidentally be pushed. Accidentally pushing
the button may deliver a Dose, causing over-delivery of
medication, which could result in death or serious injury.
CAUTION: Do not use the Remote Dose Cord to pick up or
carry the pump. Using the cord in this manner could damage
the pump or cord.
To attach the Remote Dose
Cord:
1. Open the cover over the
Data In/Out jack.
2. Line up the red mark on the
connector with the red mark
on the pump.
3. Push the connector in until
it clicks.
NOTE: Your connector may not
look like the one pictured.
To detach the Remote Dose Cord
1. Grasp the collar on the connector.
2. Pull the connector back using a straight, steady motion.
DO NOT twist or turn the connector.