5
Profiles
The software has 3 profiles, each one can store your macros and LED settings.
You can store up to 5 custom modes per profile which gives a maximum of 15 custom modes over all
3 profiles.
The software’s LED settings
1. “Light” = Enabling this opens the LED menu.
2. Dropdown menu with LED choices. Also shows the current choice.
3. “Brightness” = Increase or decrease the amount of light.
4. “Speed” = Increase or decrease the speed of the LED.
5. Either choose a solid color or enable “Random Color” = constantly changing random colors.
6. The current LED choice can be seen on the image of the keyboard. On the current image,
“retro_snake” is playing in random colors.
You can choose LED mode from the dropdown menu.
Each LED mode has its own special settings.
At the moment of writing of this manual, the modes are:
“Retro_snake, Neon_stream, Reaction, Sine_wave, Fixed_on, Respire, Rainbow, Flash_away,
Raindrops, Rainbow_wheel, Ripples_shining, Stars_twinkle, shadow_disappear, Game Mode”.
“shadow_disappear” and “Ripples_shining” only show and react when you click on the keys on the
keyboard.
“Game Mode” is similar to “Custom modes” provided from the hardware.
The custom modes are preset, to choose your own. Click on the “Color group” dropdown to choose
a custom mode to change. Click on “Color” to choose a color for a key. Then click on the key
that you wish to assign that color, if it already has a color, you have to click twice, once to
remove the color and the 2nd click to add the color. “Basic color” set all of the keys to the
chosen color. Tip: To remove all added colors you can set the “Basic color” number to R=0, G=
0, B=0.
Note: You are not able to adjust the color on all the LED modes in the software. You can see the
changes in real-time on the keyboard.
ENG - Instruction manual
