Delta TP04P, Инструкция

Страница: 4 / 20

- 3 -
Model
Spec.
TP04P series
Display text
5×8 dots: 38 characters × 8 rows
8×8 dots: 24 characters × 8 rows 8×12 dots: 24 characters × 5 rows
8×16 dots: 24 characters × 4 rows
Program
upload/download
communication port
USB (COM1) Transmission method: Virtual communication port
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits, Parity: None/Odd/Even
Baud rate: 9,600 bps~115,200 bps
USB: USB (Type B) terminal
Extension
communication port
RS485 (COM2)
RS485 (COM3) Asynchronous transmission method: RS-485
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits, Parity: None/Odd/Even
Baud rate: 9,600 bps~115,200 bps
RS-485: 8 PIN-removable terminal block
Battery cover DC 3V battery
Monitoring method Download program to TP through virtual COM port
Extension interface Slot for a program copy card
Panel component Explanation
Alarm LED indicator
(Red)
Status 1: When power is ON, LED will start to blink slowly
Status 2: When the user-defined conditions are met, LED will blink for
one second repeatedly along with an alarm sound.
Power LED indicator
(Green)
When the power is connected to the product, LED will be ON.
Display area LCM display area. It is used to display current program status.
Numeric keys
0~9: They function as constants. Users can also define the keys by
themselves.
Function keys Users can define the keys by themselves
Enter key
If the input value is correct, users can press the key. Users can define
the key in the user page.
Up/Down/Left/Right
keys
Up: increase the value or move up one page.
Down: decrease the value or move down one page.
Left: Left direction key. Can be used to select the position of the
value.
Right: Right direction key. Can be used to select the position of the
value.
ƒ
Electrical Specifications
Model
Spec.
TP04P-16TP1R TP04P-32TP1R
CPU LPC1787FBD208
Program memory 1 MB-flash memory
RAM of the system 64K Bytes
Power supply voltage
24VDC (-15% ~ 20%) (With counter-connection protection on the
polarity of DC input power)
Power consumption 3.2W 5.2W
Power protection
With counter-connection protection on the polarity of DC input
power
Insulation resistance > 5 M Ω (all I/O point-to-ground insulation resistance: 500 VDC)
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O:
1KV,
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz~1GHz, 10V/m
Ground
The diameter of ground cannot be less than the diameter of the
power cable. (If severla PLCs are used, they should be grounded
directly.)
Operating temperature
for hardware
0°C~50°C: Relative humidity: 20%-90% RH (non-condensing)