Step 5: Start a New Project
deltamotion.com
11
Set Up Universal I/O Channels
If your RMC includes a
Universal I/O
module, you must first set up the
high-speed channels before using them as part of an axis.
1.
In the Project pane, expand the
Modules
folder and double-click
the UI/O module.
2.
On the
Quad/SSI
page, choose the desired
Mode
for each
channel. Typically, this will be
Quadrature Input
or
SSI Axis Input
.
For more details, refer to the
UI/O module
topic in the RMCTools
help.
Saving Settings
Throughout the startup procedure, make sure to save the
configuration changes you make or they may be lost!
1.
Save RMCTools Project
On the
File
menu, click
Save
.
2.
Update Flash
On the
Controller
menu, click
Update Flash
.
IF YOU DO NOT UPDATE FLASH, CHANGES TO THE
RMC WILL BE LOST WHEN POWER IS REMOVED!
3.
Repeat Often
Make sure to save often to prevent loss of data.
Tip:
On the
File
menu, click
Save and Update Flash
to perform
both operations at once.