Delta RetroSign GR1, Руководство пользователя

Страница: 40 / 40

40
RetroSign GR1 & GR3 · Retroreflectometer
Status Code Breakdown
Status[0] is the same status word contained in the normal log record.
Ignore Status[1] to status[3]
Status[0] xxxx.xxxx.xxxx.xxxx
----.----.----.---|-- bit 0 Zero error 0
----.----.----.--|--- bit 1 Calibration error 0
----.----.----.-|---- bit 2 Rm Factor error 0
----.----.----.|----- bit 3 Leak error 0
----.----.---|.------ bit 4 Signal error 0
----.----.--|-.------ bit 5 zero measurement error 0
----.----.-|--.------ bit 6 Using old calibration values 0
----.----.|---.------ bit 7 Error in measurement 0
----.---|.----.------ bit 8 Warning in measurement 0
----.--|-.----.------ bit 9 Low Lamp current 0
----.-|--.----.------ bit 10 Low V-Bat warning under load 0
----.|---.----.------ bit 11 Low V-Bat Warning in idle mode 0
---|.----.----.------ bit 12 Very low V-Bat Error 0
--|-.----.----.------ bit 13 TBD 0
-|--.----.----.------ bit 14 TBD 0
|---.----.----.------ bit 15 TBD 0
Translates to 0x0000 for normal operation
Bit
Description define comment
0 Zero zero_done 1 = no valid zero values
1 Calib Calib done 1 = no valid calibration values
2 Rm Rm factor Ok 1 = no valib calibration factor
3 Leak High Leak 1 = high background signal detected
4 Signal High Signal 1 = converter overrun detected
5 Zero_Error zero_error 1 = converter underrun detected during zero
6 Old Cal used Old_Cal_Val 1 = using old calibration values
7 Mes_Error Error in Measurement 1 = error detected in measurement
8 Mes_Warn Warning in Measurement 1 = warning detected in R’ measurement
9 Lamp Lamp Current 1 = lamp current error detected during measurement
10 Battery Battery warn condition 1 = low battery condition detected during measurement
11 Bat_Warning Battery low warning 1 = the battery voltage is getting very low
12 Bat_Error Battery low error 1 = the battery voltage is to low to perform a measurement
13 TBD TBD 0
14 TBD TBD 0
15 TBD TBD 0