background image

5 Planning the installation

Planning the connection of the solar modules (DC)

44

5.5.5  Use of string fuses

When connecting one or two module strings to a DC input, no 

string fuses are required. 

DC 1

DC 2

DC 3

DC 4

DC 5

DC 6

1

2

3

MPPT

(max. 15,7 kW per MPPT)

+

+

Fig. 5.23:  Connection of one or two module strings per MPP 

tracker: no string fuses necessary

In principle, string fuses 

should

 be used when there are three 

module strings per DC input.

DC 1

DC 2

DC 3

DC 4

DC 5

DC 6

1

2

3

MPPT

(max. 15,7 kW per MPPT)

+

+

+

Fig. 5.24:  Connection of three module strings per MPP tracker: 

string fuses necessary

Note that no string fuses are installed in the 

inverter. Suitable 15 A and 20 A inline string 

fuses are available as accessories from Delta. 

These string fuses are integrated into the DC 

cable. 
Should you require this, please contact Delta 

Support by telephone. You can find the contact 

information on the last page of this manual.

When selecting protective devices (such as 

fuses), always take into account the 

maximum 

current rating

 of the solar modules.

Installation and Operation Manual for Solar Power Inverter M70A EU V2.0 EN 2020-08-03

Содержание M70A 260









































































































































































































Отзывы: