background image

37

Installation and Operation Manual M125HV EU V3 EN 2021-07-12

5 Planning the installation

Planning the grid connection (AC)

5.4 

Planning the grid connection (AC)

Related topics

“6.7 Connect the mains (AC) and solar modules (DC)”, 
page 73
 

5.4.1  Important safety instructions

 

► Always follow the specific regulations of your country or 

region.

 

► Always follow the specific regulations of your energy pro

-

vider.

 

Install all the stipulated safety and protective devices (such 
as automatic circuit breakers and/or surge protection devic-
es).

 

Protect the inverter with a suitable upstream circuit breaker:

Upstream circuit breaker

160 A

PE

L1

L3

L2

L1

L2

L3

PE

to the 
inverter

 

Selection of the protective devices for the grid cables to 
the transformer of the grid feed-in point: Always take into 
account the impedance between the PE of the inverter and 
the system and/or operational ground of the distribution 
network. This applies in particular for IT networks.

5.4.2  Residual current circuit breaker

Due to its design, the inverter cannot supply the grid with DC 
residual current. This means that the inverter meets the require-
ments of DIN VDE 0100-712.

Possible error events were assessed by Delta in accordance with 
the current installation standards. The assessments showed that 
no hazards arise from operating the inverter in combination with 
an upstream, type A residual current circuit breaker (FI circuit 
breaker, RCD). There is no need to use a type B residual current 
circuit breaker.

Minimum tripping current of the type A residual 
current circuit breaker

≥300 mA

The required tripping current of the residual cur-

rent circuit breaker depends first and foremost on 

the quality of the solar modules, the size of the 
PV system, and the ambient conditions example, 
humidity). The tripping current must not, how-

ever, be less than the specified minimum tripping 

current.

5.4.3  Integrated residual current monitoring unit

The integrated, universal current-sensitive residual current mon-

itoring unit (RCMU) is certified in accordance with VDE 0126 

1-1:2013-08, Section 6.6.2.

5.4.4  AC surge protection devices 

The inverter is equipped with type-2 AC surge protection devices. 
Replacements can be ordered from Delta Electronics.

Alternatively, type-1 AC surge protection devices can be used. 
The accessories required for connection are included in the deliv-
ery. The type-1 AC surge protection devices themselves are

not

 

included in the scope of delivery.  

5.4.5  Permissible grounding systems 

Grounding system

TN-S

TN-C

TN-C-S

TT

IT

Allowed

Yes

Yes

Yes

No

Yes

Содержание M125HV 110

























































































































































Отзывы: