Part no.:
Delta model no.: HEH080BB
Page 4
3.
Install the heater in accordance with the instructions in this installation manual.
Improper installation may result in damage, electric shock or fire.
4.
Make sure that all wiring is secured, that specified wires are used, and there is
no strain on the terminal connections or wires.
5.
Before serving or cleaning unit, switch power off and disconnect power supply.
6.
When cutting or drilling into wall or ceiling, do not damage electrical wiring or
hidden utilities.
7.
Be sure to use only the specified accessories and parts to complete installation.
8.
Protective grounding connection: The enclosure must be grounded at the
protective ground terminal. Use recommended wire and use spring washer to
avoid loosening.
9.
To reduce the risk of electrical shock: Means for disconnection must be
incorporated in the fixed wiring in accordance with the wiring rules.
10.
This appliance is intended for use only by qualified personnel.
Caution:
Do not use these electric heaters in dusty, dirty, corrosive, or hazardous locations.
Adequate protection must be taken to protect people from potential burns and to protect
other components from this heat. Always allow the heater to cool before touching it.
Thermal sensitive devices or materials may need to be located further from the heater
than the minimum recommended distance. Heaters must not be installed on wood or
other combustible surfaces. This heater must only be installed in a totally enclosed
enclosure.
1.
Do not allow children to touch it. Avoid placing any object on it.
2.
Do not block the air inlets or exits.
3.
Do not install heater at any place where there is a danger or flammable gas
leakage.
4.
To avoid injury, do not touch exhaust air or surface during operating or just turn
off products.