Part no.:
Delta model no.: HEH080AB
Page 11
2 Electrical Specification
2-1. Indicator & Connector
Power Supply Connector
Power input: AC power input with blade terminal.
(1)
AC Power Connect
：
Heater starts to heating point
(2)
Electrical connection
：
Power input: Terminal block 2P with AC L & N input.
(Mate with AWG 12~28 300V 20A)
*Thermostat (panel): setting range: -20~40°C
(Heater starts to heating point,
Tolerance 5
°C,
Switching off difference 7±4
°C)
Fuse: Cut-out temperature: 167°C
Note: DC Fan is powered by adapter (AC/DC convert).
*
The on/off temperature by user to setup
Startup average current and inrush current
：
The startup average and inrush current waveform are defined as bellow table.
These test are all finished at ambient 25
˚
C at 115Vac.
Tested waveform to startup average current and inrush current.
Item
Current and time
Wave form
Inrush
current
Typical current: 20.5A
Duration Time: 280usec
Measuring methods:
Power on AC input then
measure the peak current
value.