Delta HDMP_S100, Руководство пользователя

Страница: 4 / 110

English-2
English
Introduction
The HDMP-S100 is a High Definition Digital Signage Player expansion module with simple
web management interface to deliver high definition (720p) digital signage contents over
any TCP/IP network. This expansion module must be plugged into the expansion bay of a
compatible display device designed to work with HDMP-S100.
The HDMP-S100 has additional functions to connect to peripheral devices via the USB
ports to facilitate interactivity. Utilization of the USB ports is for upgrade and configuration
only.
This documentation describes the basic operations of the device.
Package Contents
1. HDMP-S100 Digital Signage Player x 1
2. User’s Manual for HDMP-S100 Digital Signage Player x 1
Additional Requirements
You will need the following additional items to operate the HDMP-S100 Signage Player:
1. A 2.5” hard drive (default configuration) or a Compact Flash (CF) memory card
(optional).
2. An Ethernet connection to the Internet. DHCP (Dynamic Host Configuration Protocol)
service on the Ethernet connection is recommended. Please consult with your
network engineer if you are uncertain whether you have DHCP service.
Setting Up
1. Please ensure to turn off main power switch of the display and detach the power cord.
2. Remove the protective cover of the input slot that by loosening the thumbscrew.
3. Insert the expansion module with correct orientation (see illustration) and carefully
push in the module all the way with the faceplate flushed and aligned at the base.
(Expansion module will not be able to be inserted all the way in with wrong
orientation)
4. Tighten the thumbscrew.
5. Attach the power cord and turn on the main power switch on the back and switch on
the power key on the display or on the remote control, the expansion module will be
detected automatically by the display monitor.
6. The green color LED power indicator on the expansion module should be lit.