Delta DVS-G928 series, Руководство пользователя

Страница: 66 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 4 8
_3
Description Factory default
Max Number of VLANs
When GVRP is enabled a maximum number of VLANs supported by GVRP is
specified. By default this number is 20. This number can only be changed when
GVRP is turned off.
20
3.6 SNMP
Simple Network Management Protocol (SNMP) is an application protocol used for exchanging management information
between network devices. SNMP is a member of the TCP/IP protocol suite. SNMP V1, V2 and V3 are supported on the
Delta switch, and it is enabled by default.
A Delta switch supports standard public MIBs for standard functionality and private MIBs that provide additional
functionality. You can use SNMP to enable or disable authentication traps, cold-start and warm-start functionality traps,
link up and link down traps, Spanning Tree Protocol (STP) traps, SFP traps, and password and IP address change traps.
3.6.1 System

System Configuration
Description Factory default
Mode
Specify whether the SNMP mode is enabled or not.

Enabled: SNMP is enabled.

Disabled: SNMP is disabled.
Enabled
Version
Specify the SNMP version that is used for the trap community:

SNMP v1 : Uses SNMPv1 to send traps to the trap community.

SNMP v2c : Uses SNMPv2c to send traps to the trap community.

SNMP v3 : Uses SNMPv3 to send traps to the trap community.
SNMP v2c
Read Community
Entering the community read access string to permit access to SNMP agent.
The string length is 0 to 255, and the content is the ASCII characters from 33 to
126.
public
Write Commnunity
Entering the community read access string to permit access to SNMP agent.
The string length is 0 to 255, and the content is the ASCII characters from 33 to
126.
private
Engine ID
Entering the SNMPv3 engine ID. The string must contain an even number
between 10 and 64 hexadecimal digits, but all-zeros and all-'F's are not allowed.
Change of the Engine ID will clear all original local users.
Fixed