Delta DVS-G928 series, Руководство пользователя

Страница: 57 / 206

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 3 9
_3
Description Factory default
Priority
Enter the priority for the interface in the CIST. Enter a value between 0 and 240
that is a multiple of 16. The default priority is 128.
128
Admin Edge
Controls whether the operEdge flag should start as beeing set or cleared. (The
initial operEdge state when a port is initialized).
Non-Edge
Auto Edge
Controls whether the bridge should enable automatic edge detection on the
bridge port.
Checked
Restricted
Specify whether the restricted role or TCN guard restricted is enabled or not. Unchecked
BPDU Guard
Specify whether the BPDU guard is enabled or not. Unchecked
Point-to-point
Specify the point-to-point status of the interface in the CIST:

ForceTrue: The interface has a point-to-point connection to a switch, bridge,
or end node, irrespective of the actual connection.

ForceFalse: The interface does not have a point-to-point connection to a
switch, bridge, or end node, irrespective of the actual connection.

Auto: The type of connection is automatically detected.
Auto
3.4.3.5 MSTI Ports

Select MSTI
You can select the MSTI instance number from the drop-down list then click “Get” to go the MSTI Normal Ports
Configuration.