Delta DVS-G928 series, Руководство пользователя

Страница: 37 / 206

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 1 9
_3
3.1.17 Restore
The Delta switch supports downloading the configuration from a local host.
3.1.18 Upgrade Firmware
The Delta switch supports uploading the firmware from a local host to the Delta switch.
3.2 DHCP Server/Relay
The Delta switch can function as a DHCP server, DHCP relay and DHCP L2 relay. If there is no DHCP server in your
network, then you can enable a DHCP server function on the Delta switch. If there is a DHCP server in your network, then
you can configure the Delta switch as a DHCP relay. If there is already a DHCP server and a DHCP relay in your network,
or there are L2 devices between DHCP clients and relay agents, then you can configure the Delta switch as a DHCP L2
relay in this network.
3.2.1 Settings
If the DHCP server is enabled on the switch, it can assign an IP address which is in the same network as the switch to the
client.

DHCP Server Configuration
Description Factory default
Enabled
Specify the status of the DHCP server on the switch:

Unchecked : The DHCP server is disabled.

Checked : The DHCP server is enabled.
Unchecked
Start IP Address
Enter the start IP address of the DHCP server pool. 192.168.1.100