Delta DVS-G928 series, Руководство пользователя

Страница: 32 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 1 4
_3
3.1.11 SSH
You can configure an SSH configuration on this page.

SSH Configuration
Description Factory default
Mode
Specify the status of SSH.

Disable : SSH is disabled. This is the default setting.

Enable : SSH is enabled.
Disable
3.1.12 LLDP
LLDP (Link Layer Discover Protocol) provides a method for switches, routers and access points to advertise their
identification, configuration and capabilities to the neighboring devices that store the data in a MIB, and to learn
information about the neighboring devices.
LLDP-MED (Link Layer Discovery Protocol for Media Endpoint Devices) is an extension of LLDP in that it operates
between endpoint devices such as IP phones or switches.
LLDP-Media Endpoint Discovery (LLDP-MED) is an enhancement of LLDP with the following features:

Auto Discovery: Autodiscovery of LAN policies (such as VLAN, Layer 2 priority, and DiffServ settings) and capability
to enable a plug and play networking

Device Location: Device location discovery for the creation of location databases

Power Management: Extended and automated power management of Power over Ethernet (PoE) endpoints

Inventory Management: Inventory management, which lets network administrators track network devices and
determine their characteristics such as the manufacturer, the software and hardware versions, and the serial and
asset numbers
3.1.12.1 Configuration
This page allows the user to inspect and configure the current LLDP port settings.

LLDP Parameter
Description Factory default
Tx Interval
Entering the transmit interval of LLDP message in seconds. The values are 5 to
32678.
Disable